SABRENT SBT-SRD4 PCI SATA Host Card Adapter

Type

SATA

External Connectors

Serial ATA/150

Internal Connectors

4 x SATA 150

Interface

PCI

Transfer Rate

1.5Gb/s

RAID

RAID 0/1/0+1/1+S

Operating Systems Supported

Windows 98/ 98SE / Me / NT4.0 / 2000 / XP/ NT 4.0, Windows Server 2003, Linux, Novell Netware

Features

Features

Provides 2 Brackets to Support Low profile PCI and Regular size PCI in one card 
48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB 
Hot-plug capability 
Fully compliant with Serial ATA 1.5G specifications 
Provides RAID 0 (Striping) to greatly increase the performance of data transfer by simultaneously writing data to 2 drives 
Provides RAID 1 (Mirroring) to protect the data from a disk failure by writing identical data on 2 drives 
RAID 0+1 (Mirrored-Striping) combine both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that comes from Mirroring 
RAID 1+S (Mirrored-sparing) can automatically replace the failed drive and rebuild the system when booting HDD is failed 
Supports ATAPI commands 
Supports Spread Spectrum in receiver 
Independent 256-byte FIFOs (32 bit x 64 deep) per Serial ATA channel for host reads and writes 
Compliant with PCI Specification, revision 2.2 
Integrated PCI DMA engines 
Four Pin header on board for LED connection 
32 bit, 33/66MHz fully compliant PCI host interface 
Acts as NON-RAID when not BIOS configured RAID