Key Features: 1. Dual Intel® Xeon® Support up to 3.00 GHz 2. Intel E7500 Chipset 3. Up to 16GB DDR 200 SDRAM 4. Dual Intel 82550 10/100 Ethernet Controllers 5. Dual ATA/100 IDE Channels 6. 6 x 64-bit PCI-X expansion slots 7. ATI RageXL 8MB PCI Graphic Controller
Form Factor		Extended ATX
Dimensions		12" x 13.05" (30.5cm x 33.2cm)

Processor/Cache
CPU		• Dual mPGA603 ZIF Sockets • Supports up to two Intel Xeon processor(s) with 1MB integrated Advanced Transfer Cache up to 3.00GHz
System Bus		400MHz system bus

System Memory
Memory Capacity		• Eight 184-pin DIMM sockets • Supports up to 16 GB DDR266/200 memory • Dual channel memory bus • Memory must be populated in pairs
Memory Type		DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes		128MB,256MB, 512MB, 1GB, 2GB
Memory Voltage		2.5 V only

On-Board Devices
Chipset		• Intel E7500 chipset • MCH + ICH3-S + P64H2
IDE		• Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
RAID		• Support for Zero-Channel RAID with ZCR Card • Optional: (Card not included)
IPMI		Support for Intelligent Platform Management Interface v.1.5 (Optional)
Network Controllers		• 1x Intel® 82545EM Gigabit Ethernet • 1x Intel® 82551 10/100M Ethernet • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics		ATI Rage XL SVGA PCI video controller with 8 MB of video memory

Input / Output
PCI Expansion		• Max 2x 64-bit 133MHz PCI-X (3.3V) slots Default: • 2x 64-bit 100/66MHz PCI-X (3.3V) slot • 4x 64-bit 66MHz PCI-X (3.3V) slots • 1x SXB (Supermicro Extended Bus) slot
IDE		• Dual EIDE channels support up to four UDMA IDE devices • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
USB		Up to 5 USB ports
Serial Ports		2 Fast UART 16550 serial ports
Parallel Port		1 ECP/EEP parallel port
Floppy		1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
Keyboard / Mouse		PS/2 keyboard and mouse ports

Compatibility:

Supermicro servers

• SC742i-420
• SC742i-600
• SC942i-550
• SC942i-600

Important Note To ensure system stability, a 350W (minimum) ATX power supply [8-pin +12V AND (20 or 24-pin)] is required.